BNRQZ - 39-80055-030, PART A
- MSDS: BNRQZ
- Manufacturer: SYON CORP
- Product Name: 39-80055-030, PART A
- National Stock Number: 8040-00-776-9601
Product Identification
Product ID:39-80055-030, PART A
MSDS Date:01/01/1990
FSC:8040
NIIN:00-776-9601
Kit Part:Y
MSDS Number: BNRQZ
Responsible Party
ASHLAND, MA 01721
US
Emergency Phone: 508-881-8852
Info Phone: 508-881-8852
Cage: SYONC
Contractor
Telephone: 508-881-8852
Cage: SYONC
Ingredients
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: 0.0006%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN EXPOSURE
CAN CAUSE MILD SKIN IRRITATION. MILDLY IRRITATING TO THE EYES.
First Aid
First Aid:GET MEDICAL ATTENTION IMMEDIATELY. INHALATION: REMOVE TO
FRESH AIR. SKIN: WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION IF
IRRITATION PERSISTS. EYES: FLUSH WITH WATER FOR 15 MINUTES. GET
MEDICAL ATT ENTION IF IRRITATION PERSISTS.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>260F,>127C
Extinguishing Media:CO2, DRY CHEMICAL, WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING AND
RESPIRATOR. SCOOP UP EXCESS AND REMOVE. RESIDUAL CAN BE REMOVED
WITH NONFLAMMABLE SOLVENT.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL & MECHANICAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH-PROOF GOGGLES.
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH FACILITIES.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.15
Appearance and Odor:AMBER LIQUID.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:STORE AT ELEVATED TEMPERATURES OVER LONG
PERIODS OF TIME.
Hazardous Decomposition Products:CO, ALDEHYDES AND ACIDS.
Conditions to Avoid Polymerization:EXCESSIVE EXOTHERMS WHEN CURED.
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH LOCAL POLLUTION
REGULATIONS AND ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.